Comprehensive chimney care for your home's safety and efficiency
Creosote builds up every time you burn wood - and it's the #1 cause of chimney fires. We clean the full flue system from top to firebox, removing soot, glazed creosote, and blockages so your chimney draws properly and your family stays safe.
Level 1, 2, or 3 - we match the inspection to the situation. Buying a home? Level 2 with video. Annual checkup? Level 1 covers it. We document everything with photos and give you a clear report, not a sales pitch.
Cracked crowns, crumbling mortar joints, damaged flue tiles - we fix what's broken before it becomes a bigger problem. Most repairs take a day or less, and we'll show you exactly what needs work before we start.
A chimney without a cap is an open invitation for rain, raccoons, and downdrafts. We install stainless steel and copper caps with built-in spark arrestors, custom-sized to fit your flue opening exactly.
Older chimneys often have cracked clay tiles or no liner at all - both are fire hazards. We install stainless steel and cast-in-place liners that meet current code and actually improve your draft.
Brick and mortar don't last forever, especially in humid climates. We repoint deteriorated joints, replace spalled bricks, and match existing materials so the repair blends in. Catches water problems before they reach your interior walls.
That dark stain on your ceiling near the chimney? Probably failed flashing. We remove the old material, install new step and counter flashing, and seal everything properly. Stops leaks at the source.
When repair isn't enough, we rebuild. From the roofline up or from the foundation - depends on how far the damage goes. New masonry, new liner, new cap, new flashing. Done right so you won't need us again for decades.
Scratching sounds? Foul smell? Birds, squirrels, and raccoons love chimneys. We remove them humanely, clear out nesting material, and cap the flue so they can't get back in.
Ash piling up in the firebox, soot on the damper, smoke stains on the surround - we clean it all. Includes the firebox, smoke shelf, and damper assembly. Your fireplace will look and work like it should.
Smoke pouring into the room instead of going up? Damper stuck? Cracked smoke chamber? We diagnose the actual problem - not guess - and fix it. Most fireplace issues are straightforward once you know where to look.
Cracked firebricks and deteriorated refractory panels are more than cosmetic - they let heat reach combustible framing behind the wall. We replace damaged bricks and mortar with proper heat-rated materials.
Gas fireplaces still need annual service. Dust coats the burner and logs, the pilot assembly corrodes, and the glass fogs up. We clean the full unit - burner, pilot, glass, and venting - so it runs clean and stays under warranty.
Pilot won't stay lit? No heat? Remote stopped working? We troubleshoot gas fireplace issues from thermocouples to valve assemblies. Certified on all major brands - Heatilator, Lennox, Napoleon, Majestic, and more.
Door gaskets wear out, baffles warp, glass cracks. We service all wood stove brands - replace worn parts, adjust the door seal, and make sure your stove drafts correctly. Gets your heat output back where it should be.
Auger jams, igniter failures, control board errors - pellet stoves have more moving parts than most people realize. We diagnose and repair the issue, clean the exhaust path, and get your stove feeding and burning properly again.
Your HVAC pushes air through every duct in the house - along with whatever's living in them. Dust, pet dander, mold spores, construction debris. We clean the full system and you'll notice the difference in air quality immediately.
Lint in your dryer vent is a fire waiting to happen - it's one of the top causes of house fires nationally. We clean the full run from the dryer to the exterior vent. Clothes dry faster, energy bill drops, fire risk gone.
Restaurants, offices, multi-unit buildings - commercial ductwork collects grease, dust, and allergens at scale. We schedule after hours to keep your business running and bring your system up to health code standards.
Our technicians are CSIA certified and undergo continuous training.
Complete liability and workers' compensation insurance for your peace of mind.
Emergency services available. We respond quickly to your chimney needs.
We stand behind our work with a complete satisfaction guarantee.
No hidden fees. Free estimates and upfront pricing on all services.
Hundreds of satisfied customers across Currituck and surrounding areas.
Real jobs, real results from your neighborhood
Customer had a compromised chimney system with a missing/poorly sealed cap and evidence of water intrusion. Inspection showed a rusted old cap, cracked and spalled concrete crown, peeling paint and wood rot on the chase trim, degraded flashing with visible gaps, and soot/mineral staining and surface rust inside the flue indicating moisture exposure and need for cleaning.
Removed the deteriorated cap and installed a new mesh chimney cap and metal chase cover securely fastened to the rectangular wood-sided chase; resurfaced the concrete crown with a light-gray mortar/concrete topping to seal cracks. Secured and temporarily sealed flashing seams and cleaned the firebox and performed a light flue brush to remove loose soot, then documented areas of rot and corrosion and provided recommendations and an estimate for full flashing replacement, chase siding/trim repair, and a comprehensive flue cleaning/inspection.
Expert advice tailored to Currituck
Living in Currituck County means dealing with unique coastal challenges like salt air and heavy rains, which can wreak havoc on your chimney. This guide provides essential, locally-focused maintenance tips to protect your coastal home and family.
Living in Currituck means dealing with unique coastal weather that can take a toll on your chimney. This guide explains why local, annual inspections are crucial for preventing costly damage from salt, wind, and rain, and keeping your family safe.
Living in Currituck County means dealing with unique chimney challenges like corrosive salt air and hurricane-force winds. This guide offers practical, local tips to protect your coastal home's chimney from moisture damage, storm risks, and unwanted critters.
Discover why late spring and summer, not fall, is the ideal time for chimney cleaning in Currituck, NC. Our coastal climate of salt air and humidity presents unique challenges that make an off-season inspection and cleaning essential for your home's safety.
Living in beautiful Currituck County means your chimney faces unique challenges from salt air, humidity, and coastal storms. Discover the top three issues we see in local homes and learn practical tips to protect your coastal property and family.
Common questions from Currituck
In Currituck County, you can expect a typical chimney sweep to cost between $225 to $350 for a standard Level 1 inspection and cleaning. Factors like chimney height and creosote buildup can influence the final price. Our coastal climate impacts your chimney’s condition; the salty, humid air can deteriorate metal components and mortar joints more swiftly. While cleaning costs are usually stable, any necessary repairs due to coastal wear and tear will be quoted separately after inspection. We keep a vigilant eye out for such issues to ensure your chimney remains safe and functional.
For homeowners in Currituck, an annual chimney inspection and cleaning is especially important due to our unique coastal conditions. While the standard recommendation is yearly, the salty air and humidity can quickly cause deterioration. This is crucial to prevent water damage and structural issues - especially with the frequent storms we face. Typically, inspections range from $150 to $300 in the area. Think of it as essential maintenance: keeping your chimney in shape not only safeguards your home but also prepares it for those stormy winters.
For those with a vacation home in Corolla, scheduling a chimney cleaning is best done in spring, from late March to June. Post-fire season is the ideal time to remove soot and creosote before the humid summer sets in; this prevents moisture from exacerbating buildup. Plus, spring cleaning helps you avoid the busy fall rush where appointments can fill weeks ahead. You’ll have the best selection of times to ensure your fireplace is ready well before the colder weather arrives. Being proactive means peace of mind for your off-season preparations.
In Currituck, it’s critical to conduct a professional chimney inspection at least once a year. Our humid climate exacerbates wear, accelerating issues with bricks and mortar, not to mention making your chimney more susceptible to damage from nor'easters. While not mandated by North Carolina law, the National Fire Protection Association (NFPA) recommends annual inspections to mitigate fire risks. Regular checks also help catch moisture issues early, ensuring your chimney is safe and functional throughout the colder months.
Yes, you’ll need a building permit to install a new wood stove or fireplace in Currituck County. This requirement ensures that installations comply with the North Carolina State Building Code, maintaining safety and proper ventilation. The coastal environment adds another layer of concern; high winds can influence chimney performance, so a certified installation is crucial. If you choose us for your project, we’ll handle the permitting process for you, ensuring everything is compliant and up to code, which gives you peace of mind for your new fireplace.
Fill out the form below and we'll contact you within 24 hours